APM 2.8 Quadcopter building tutorial : Mission Planner is showing ‘NO FIX’, so I’m assuming the GPS is communicating just fine with the Cube Black. I have tried configuring it with CAN, and I am getting the same result. I just want to confirm if I have a dead GPS, because it was working fine couple months ago. Please let me know if you guys need further information. Thanks again! I’ll report this to the devs, hopefully they can confirm. visser (visser) October 19, 2014, 5:46pm 3. Started having this issue today, updated to AC3.2-RC12. Bad Compass Health notice on HUD. I’m using a APM 1.6 clone board with the internal compass trace cut and a NEO-6M GPS/compass, had calibrated compass without issue on AC3.1.5. 02:26:53 GPS Glitch 02:27:49 Battery 1 is low 10.46V used 205 mAh 02:27:49 Battery Failsafe 02:28:19 GPS Glitch cleared 02:28:24 GPS Glitch 02:28:30 GPS Glitch cleared 02:30:51 GPS Glitch 02:30:59 GPS Glitch cleared. Number of Sats and HDOP is slightly better but not by much. I would set these: FENCE_ALT_MAX,120 <- set for safety and local laws FC=F405 Wing GPS=Hollybro Micro Mini (M8N) Running ArduPlane 3.9.4. I’ve tried UART3, UART5, and UART6. I’ve tried 115,200 and 38,400 Baud. Tried two different GPS units (both of the same type). All variations have th… . Getting started. This manual is split into two parts; the first is an overview of the basic setup of the GPS units. In the following examples the H-RTK M8P is used but the setup and operation of M8P and F9P GPS units are the same. The second part of this manual explains how to update and change the settings on your GPS unit. I build a quad with Arducopter 4.2.0 and it says 3D GPS Fix but it’s unable to arm “PreArm: GPS: waiting for home” and it has 8 sats. Why is it waiting for home when it has a 3D fix? rmackay9 (rmackay9) May 24, 2022, 12:38am Fixed Wing FAQ. This is a set of frequently asked questions with answers. It is updated when we see questions on discuss.ardupilot.org that are not sufficiently answered in the rest of the docs. When reading this FAQ please refer to the full parameter list for an explanation of each parameter which is mentioned in the answers. No GPS Fix problem with UBlox NEO 6M GPS module. Building my first quad using an APM module. I am done with calibrating the Compass, Accelerometer, Radio, and the ESC [hopefully!]. The only problem is with getting a GPS lock in the planner. The only status on the GPS module that is constantly ON is the Power Status blue LED. Upload scripts (files with extension .lua) to the autopilot’s SD card’s APM/scripts folder. If this folder does not exist, you can create it by setting SCR_ENABLE to 1 and rebooting. This folder can also be created manually on the SD card. If using Mission Planner, this can be done using MAVFTP.

gps no fix mission planner